home *** CD-ROM | disk | FTP | other *** search
- * Recently, a number of sound card manufacturers have changed their default
- IRQ setting from 7 to 5. This was done to prevent various hardware conflicts
- with third party devices, which can cause some software to lock
- intermitently. If you experience any problems, particularly sound related,
- while playing CyberRace, try adjusting your sound card to run at a lower
- IRQ setting. Follow your sound card's directions or contact the
- manufacturer's technical support to reconfigure your card to run at a lower
- interupt number. We recommend running at an IRQ of 5, and a DMA of 1.
-
- * If you are using a sound card other than SoundBlaster and the boot disk,
- you must add to the corresponding files on your boot disk the sound card
- configuration information from your CONFIG.SYS and AUTOEXEC.BAT.
-
- * The Num Lock must be off in order for the keypad controls to function.
-
- * If you use a ThrustMaster input device connected to a sound card game
- port, the "Hat" controls may not function properly. In such cases,
- we advise you to connect your ThrustMaster to a separate game port.
-
-
- Type DEMO to start the demo.
- Press Esc to exit the demo.